HIGHLIGHT OF THE PRODUCTS

  • Ideal for hot and cold water applications

  • Suitable for water temperature upto 930c

  • Can withstand 28.1kg/cm 2 pressure at 270c and 6.93kg/cm2 at 820c

  • Wide Range of pipes and fittings from 1/2″ to 4″

  • Safe for portable water

  • UV Stabilised

  • No bacterial growth

  • Ease of installation

  • Designed for over 50 years life

  • Pipes upto 2″ are manufactured as per IS:15778:2007 and fittings as per ASTM standards .

PRODUCT AVAILABILITY, PRESSURE RATING AND STANDARDS
CPVC IS RESISTANT TO WATER TEMPERATURE
  • 930C for SHORT term application

  • 820c for CONTINUOS application. It keeps hot water hotter and cold waetr colder as compared to GI and copper plumbing

TEMPERATURE DE-RATING FACTOR FOR CPVC

INSTALLATION PROCEDURE

A. Guidelines
  • Connect minimum 1 mtr. length of metal pipe to the outlet of hot water tank.

  • Ventilation-proper air-venting on the hot water outlet side is a must

  •  Use of expansion loop is highly recommended to avoid snaking effect caused due to expansion & contraction of pipe.

  •  Although CPVC has the lowest thermal conductivity amongst all alternate plastic plumbing systems, however to maintain thermal efficiency, it is recommended that the pipes should be insulated. PE foam may be used over the pipe to provide adequate insulation

B.Horizontal and vertical spacing for pipe supporting(clamping of pipes)

Do not clamp supports tightly, it restricts the movement of pipe caused because of expansion and contraction

Installation with solvent cement
SOLVENT CEMENTED JOINTING
  • a. Dry fitment-check joint of pipe to fitting without solvent cement, should fit up to 60-70 %.

  • b. Cold fusion joint(cold welded joint)

  • c. For diameters 1/2″ to 2″, single step solvent cement

  • d. For diameters 21/2″ to 4″, 2 step solvent cement (primer+solvent cement).

  • e. Primer helps to clean the surface of pipe & fitting and softens the material

Note– Typical set scheduled is required time before it is advisable to carefully handle joint. In wet or humid conditions, additional set time maybe required of up to 50% of amount listed.
Use as general guidelines only.

  • f. Cure time– Curing time is longer than the set time. Curing means the joint has completely matured

  • g.The pressure test can only be performed after the joint is completely cured

Note– Joint cure schedule is the necessary time to allow before pressuring system. In damp or humid weather allow 50% more cure time.

In case of using paint on CPVC piping system use only Latex based paints which are water based to make it workable and brushable. No oil/ Solvent based paints are to be used as these paints can drastically reduce the life of the systems.

Color Coding(Printing on Pipes)

CPVC PLUMBING SYSTEM FOR HOT & COLD WATER

CPVC PIPES - HSN CODE:3917

SDR-11 (3Mtr. Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP1103015 15 1/2
CP1103020 20 3/4
CP1103025 25 1
CP1103032 32 1 1/2
CP1103040 40 1 1/4
CP1103050 50 2

SDR-11 (5Mtr. Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP1105015 15 1/2
CP1105020 20 3/4
CP1105025 25 1
CP1105032 32 1 1/2
CP1105040 40 1 1/4
CP1105050 50 2

SDR-13.5 (3Mtr. Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP1303015 15 1/2
CP1303020 20 3/4
CP1303025 25 1
CP1303032 32 1 1/2
CP1303040 40 1 1/4
CP1303050 50 2

SDR-13.5 (5Mtr. Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP1305015 15 1/2
CP1305020 20 3/4
CP1305025 25 1
CP1305032 32 1 1/2
CP1305040 40 1 1/4
CP1305050 50 2

CPVC FITTINGS - HSN CODE:3917

Coupler Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF01000015 15 1/2
CF01000020 20 3/4
CF01000025 25 1
CF01000032 32 1 1/2
CF01000040 40 1 1/4
CF01000050 50 2

Elbow 900 Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF02000015 15 1/2
CF02000020 20 3/4
CF02000025 25 1
CF02000032 32 1 1/2
CF02000040 40 1 1/4
CF02000050 50 2

Bend 450 Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF03000015 15 1/2
CF03000020 20 3/4
CF03000025 25 1
CF03000032 32 1 1/2
CF03000040 40 1 1/4
CF03000050 50 2

Reducer Elbow 900

ITEM CODE SIZE (MM) SIZE (IN)
CF04020015 20X15 3/4 X 1/2
CF04025015 25X15 1 X 1/2
CF04000015 25X20 1 X 3/4

Tee 900 Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF05000015 15 1/2
CF05000020 20 3/4
CF05000025 25 1
CF05000032 32 1 1/2
CF05000040 40 1 1/4
CF05000050 50 2

Reducer Tee 900 Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF06020015 20X15 3/4 X 3/4 X 1/2
CF06025015 25X15 1 X 1 X 1/2
CF06025020 25X20 1 X 1 X 3/4
CF06032015 32X15 1 1/4 X 1 1/4 X 1/2
CF06032020 32X20 1 1/4 X 1 1/4 X 3/4
CF06032025 32X25 1 1/4 X 1 1/4 X 1
CF06040015 40X15 1 1/2 X 1 1/2 X 1/2
CF06040020 40X20 1 1/2 X 1 1/2 X 3/4
CF06040025 40X25 1 1/2 X 1 1/2 X 1
CF06040032 40X32 1 1/2 X 1 1/2 X 1 1/4
CF06050015 50X20 2 X 2 X 3/4
CF06050025 50X25 2 X 2 X 1
CF06050032 50X32 2 X 2 X 1 1/4
CF06050040 50X40 2 X 2 X 1 1/2

Cross Tee 900

ITEM CODE SIZE (MM) SIZE (IN)
CF07000015 15 1/2
CF07000020 20 3/4

End Cap Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF08000015 15 1/2
CF08000020 20 3/4
CF08000025 25 1
CF08000032 32 1 X 1/4
CF08000040 40 1 X 1/2
CF08050050 50 2

Reducer Bush Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF09020015 20X15 3/4 X 1/2
CF09025015 25X15 1 X 1/2
CF09025020 25X20 1 X 3/4
CF09032025 32X25 1 1/4 X 1
CF09032020 32X20 1 1/4 X 3/4
CF09032015 32X15 1 1/4 X 1/2
CF09040032 40X32 1 1/2 X 1 1/4
CF09040025 40X25 1 1/2 X 1
CF09040020 40X20 1 1/2 X 3/4
CF09040040 40X40 1 1/2 X 1/2
CF09050040 50X40 2 X 1 1/2
CF09050032 50X32 2 X 1 1/4
CF09050025 50X25 2 X 1
CF09050020 50X20 2 X 3/4
CF09050015 50X15 2 X 1/2

Male Adaptor Plastic Threaded (MAPT)

ITEM CODE SIZE (MM) SIZE (IN)
CF10000015 15 1/2
CF10000020 20 3/4
CF10000025 25 1
CF10000032 32 1 1/2
CF10000040 40 1 1/4
CF10050050 50 2

Female Adaptor Plastic Threaded (FAPT)

ITEM CODE SIZE (MM) SIZE (IN)
CF11000015 15 1/2
CF11000020 20 3/4
CF11000025 25 1
CF11000032 32 1 1/2
CF11000040 40 1 1/4
CF11050050 50 2

Tank Nipple

ITEM CODE SIZE (MM) SIZE (IN)
CF12000015 15 1/2
CF12000020 20 3/4
CF12000025 25 1
CF12000032 32 1 1/2
CF12000040 40 1 1/4
CF12050050 50 2

Tank Nipple (With One Side Pipe Fitement)

ITEM CODE SIZE (MM) SIZE (IN)
CF13000020 20 3/4
CF13000020 25 1

Union

ITEM CODE SIZE (MM) SIZE (IN)
CF14000015 15 1/2
CF14000020 20 3/4
CF14000025 25 1
CF14000032 32 1 1/2
CF14000040 40 1 1/4
CF14050050 50 2

Reducer

ITEM CODE SIZE (MM) SIZE (IN)
CF15020015 20X15 3/4″ X 1/2″
CF15025020 25X20 1″ X 3/4″
CF15025015 25X15 1″ X 1/2″
CF15032015 32X15 1 1/4″ X 1/2″
CF15032015 32X20 1 1/4″ X 3/4″
CF15032025 32X25 1 1/4″ X 1″
CF15040040 40X40 1 1/2″ X 1/2″
CF15040020 40X20 1 1/2″ X 3/4″
CF15040025 40X25 1 1/2″ X 1″
CF15040032 40X32 1 1/2″ X 1 1/4″
CF15050015 50X15 2″ X 1/2″
CF15050020 50X20 2″ 3/4″
CF15050025 50X20 2″ X 1″
CF15050032 50X32 2″ 1 1/4″
CF15050040 50X40 2″ X 1 1/2″

Transition Bushing (IPS X CTS)

ITEM CODE SIZE (MM) SIZE (IN)
CF16015015 15X15 1/2″IPS X 1/2″CTS
CF16020020 20X20 3/4″IPS X 3/4″CTS
CF16025025 25X25 1″IPS X 1″CTS
CF16032032 32X32 1 1/4″IPS X 1 1/2″CTS
CF16040040 40X40 1 1/2″IPS X 1 1/2″CTS
CF16050050 50X50 2″IPS X 2″CTS

Reducer MTA

ITEM CODE SIZE (MM) SIZE (IN)
CF17020015 20X15 3/4 X 1/2
CF17025020 25X20 1 X 3/4

Step Over Bend

ITEM CODE SIZE (MM) SIZE (IN)
CF18000020 20 13/4″
CF18000025 25 1″

Threaded End Plug

ITEM CODE SIZE (MM) SIZE (IN)
CEEP010015 15 1/2″
CEEP010020 20 3/4″

Ball Valve

ITEM CODE SIZE (MM) SIZE (IN)
CEBV010015 15 1/2″
CEBV010020 20 3/4″
CEBV010025 25 1″
CEBV010032 32 1 1/4″
CEBV010040 40 1 1/2″
CEBV010050 50 2″

CPVC

CPVC FITTINGS - BRASS - HSN CODE:3917

Elbow 900 Brass

ITEM CODE SIZE (MM) SIZE (IN)
CF24015015 15X15 1/2″ X 1/2″
CF24020015 20X15 3/4″ X 1/2″
CF24020020 20X20 3/4″ X 3/4″
CF24025025 25X25 1″ X 1″
CF24025020 25X20 1″ X 3/4″
CF24025015 25X15 1″ X 1/2″
CF24032032 32X32 1 1/4″ X 1 1/4″

Tee Brass

ITEM CODE SIZE (MM) SIZE (IN)
CF25015015 15X15 1/2″ X 1/2″ X 1/2″
CF25020015 20X15 3/4″ X 3/4″ X 1/2″
CF25020020 20X20 3/4″ X 3/4″ X 3/4″
CF25025015 25X15 1″ X 1″ X 1/2″
CF25025020 25X20 1″ X 1″ X 3/4″
CF25025025 25X25 1″ X 1″ X 1″
CF25032015 32X15 1 1/4″ X 1 1/4″ X 1/2″

Male Adaptor Brass Threaded MABT

ITEM CODE SIZE (MM) SIZE (IN)
CF26000015 15 1/2
CF26000020 20 3/4
CF26000025 25 1
CF26000032 32 1 1/4
CF26000040 40 1 1/2
CF26050050 50 2

Female Adaptor Brass Threaded FABT

ITEM CODE SIZE (MM) SIZE (IN)
CF27000015 15 1/2
CF27000020 20 3/4
CF27000025 25 1
CF27000032 32 1 1/4
CF27000040 40 1 1/2
CF27050050 50 2

Reducer MTA Brass

ITEM CODE SIZE (MM) SIZE (IN)
CF29020015 20X15 3/4″ X 1/2″
CF29025020 25X20 1″ X 3/4″
CF29025015 25X15 1″ X 1/2″

Reducer FTA Brass

ITEM CODE SIZE (MM) SIZE (IN)
CF28020015 20X15 3/4″ X 1/2″
CF28025015 25X15 1″ X 1/2″
CF28025020 25X20 1″ X 3/4″

CPVC FITTINGS - COMMON- HSN CODE:3917

Plastic Clamps

ITEM CODE SIZE (MM) SIZE (IN)
CEPC020015 15 1/2″
CEPC020020 20 3/4″
CEPC020025 25 1″
CEPC020032 32 1 1/4″
CEPC020040 40 1 1/2″
CEPC020050 50 2″

Powder Coated Metal Clamps

ITEM CODE SIZE (MM) SIZE (IN)
CEPC010015 15 1/2″
CEPC010020 20 3/4″
CEPC010025 25 1″
CEPC010032 32 1 1/4″
CEPC010040 40 1 1/2″
CEPC010050 50 2″

CPVC PIPES - HSN CODE:3917

SCH-40 (3Mtr.Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP4003065 65 2 1/2″
CP4003080 80 3″
CP4003100 100 4″

SCH-40 (5Mtr.Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP4005065 65 2 1/2″
CP4005080 80 3″
CP4005100 100 4″

SCH-80 (3Mtr.Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP8003065 65 2 1/2″
CP8003080 80 3″
CP8003100 100 4″

SCH-80 (5Mtr.Length)

ITEM CODE SIZE (MM) SIZE (IN)
CP8005065 65 2 1/2″
CP8005080 80 3″
CP8005100 100 4″

CPVC FITTINGS - SCH80 - HSN CODE:3917

Coupler Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF19000065 65 2 1/2″
CF19000080 80 3″
CF19000100 100 4″

Elbow 900 Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF20000065 65 2 1/2″
CF20000080 80 3″
CF20000100 100 4″

Tee 900 Plain

ITEM CODE SIZE (MM) SIZE (IN)
CF21000065 65 2 1/2″
CF21000080 80 3″
CF21000100 100 4″

Reducer Brush

ITEM CODE SIZE (MM) SIZE (IN)
CF22065050 65X50 2 1/2″ X 2″
CF22080065 80X65 3″ X 2 1/2″
CF22075050 80X50 3″ X 2″
CF22100080 100X80 4″ X 3″
CF22100065 100X65 4″ X 2 1/2″
CF22100050 100X50 4″ X 2″

Transition Bushing (IPS X CTS)

ITEM CODE SIZE (MM) SIZE (IN)
CF23065050 65X65 2 1/2″IPS X 2″CTS
CF23080050 80X50 3″IPS X 2″CTS
CF23100050 100X50 4″IPS X 2″CTS

CPVC SOLVENT CEMENT & PRIMER - HSN CODE:3506

Medium Duty Step 1 (Yellow)

ITEM CODE Tube/Tin SIZE (ml)
CESYMD0029 Tube 29
CESYMD0059 Tube 59
CESYMD0118 Tin 118
CESYMD0237 Tin 237
CESYMD0473 Tin 473

Heavy Duty 2 Step (Orange)

ITEM CODE Tube/Tin SIZE (ml)
CESOHD0237 Tin 237
CESOHD0473 Tin 473

Primer

ITEM CODE Tube/Tin SIZE (ml)
PRIMER0473 Tin 473

TATSU IS AWESOME

A Powerful and Elegant Front End Page Builder for WordPress